Problems

Filters
Clear Filters

4 problems found

2017 Paper 3 Q10
D: 1700.0 B: 1484.0

A uniform rod \(PQ\) of mass \(m\) and length \(3a\) is freely hinged at \(P\). The rod is held horizontally and a particle of mass \(m\) is placed on top of the rod at a distance~\(\ell\) from \(P\), where \(\ell <2a\). The coefficient of friction between the rod and the particle is \(\mu\). The rod is then released. Show that, while the particle does not slip along the rod, \[ (3a^2+\ell^2)\dot \theta^2 = g(3a+2\ell)\sin\theta \,, \] where \(\theta\) is the angle through which the rod has turned, and the dot denotes the time derivative. Hence, or otherwise, find an expression for \(\ddot \theta\) and show that the normal reaction of the rod on the particle is non-zero when~\(\theta\) is acute. Show further that, when the particle is on the point of slipping, \[ \tan\theta = \frac{\mu a (2a-\ell)}{2(\ell^2 + a\ell +a^2)} \,. \] What happens at the moment the rod is released if, instead, \(\ell>2a\)?


Solution:

TikZ diagram
By energy considerations, the initial energy is \(0\).
Inital\@ \(\theta\)
Rotational KE of rod\(0\)\(\frac{1}{2}I\dot{\theta}^2 = \frac{1}{2} \frac{1}{3} m (3a)^2 \dot{\theta}^2 = \frac32 m a^2 \dot{\theta}^2\)
KE of particle\(0\)\(\frac12 m \ell^2\dot{\theta}^2\)
GPE of rod\(0\)\(-\frac{3}{2}mga \sin \theta\)
GPE of particle\(0\)\(-mg \ell \sin \theta\)
Total\(0\)\(\frac12m \l \l 3a^2 + \ell^2\r \dot{\theta}^2 - \l 3a + 2\ell \r g \sin \theta \r\)
Therefore: \begin{align*} && \l 3a^2 + \ell^2\r \dot{\theta}^2 &= \l 3a + 2\ell \r g \sin \theta \\ \Rightarrow && \l 3a^2 + \ell^2\r 2\dot{\theta} \ddot{\theta} &= \l 3a + 2\ell \r g \cos\theta \dot{\theta} \tag{\(\frac{\d}{\d t}\)} \\ \Rightarrow && 2\l 3a^2 + \ell^2\r \ddot{\theta} &= \l 3a + 2\ell \r g \cos\theta \\ \Rightarrow && \ddot{\theta} &= \boxed{\frac{3a + 2\ell }{2(3a^2 + \ell^2)}g \cos\theta} \\ \end{align*} \begin{align*} \text{N}2(\perp PQ): && mg \cos \theta - R &= m \ell \ddot{\theta} \\ && R &= mg \cos \theta - m \ell \l \frac{3a + 2\ell }{2(3a^2 + \ell^2)}g \cos\theta \r \\ && &= mg\cos \theta \l 1 - \ell \frac{3a + 2\ell }{2(3a^2 + \ell^2)} \r \\ && &= mg \cos \theta \l \frac{6a^2 + 2\ell^2 - 3a\ell - 2\ell^2}{2(3a^2 + \ell^2)} \r \\ && &= mg \cos \theta \l \frac{3a(2a - \ell)}{2(3a^2 + \ell^2)} \r > 0 \tag{since \(2a > \ell\)} \end{align*} At limiting equilibrium, \(F = \mu R\). \begin{align*} \text{N}2(\parallel PQ): && \mu R - mg \sin \theta &= m \ell \dot{\theta}^2 \\ \Rightarrow && \mu mg \cos \theta \l \frac{3a(2a - \ell)}{2(3a^2 + \ell^2)} \r - mg \sin \theta &= m \ell \frac{(3a+2\ell)}{(3a^2+\ell^2)} g \sin \theta \\ \Rightarrow && \mu \l 3a(2a - \ell) \r - \l 2(3a^2 + \ell^2) \r \tan \theta &= 2\ell (3a+2\ell) \tan \theta \\ \Rightarrow && \mu \l 3a(2a - \ell) \r &= \l 6a\ell + 6a^2 + 6\ell^2 \r \tan \theta \\ \Rightarrow && \tan \theta &= \boxed{\frac{\mu a(2a-\ell)}{2(a^2 + a\ell + \ell^2)}} \end{align*} If \(\ell > 2a\), then the initial reaction force will be \(0\), ie the particle will have no contact with the rod. In other words, the rod will rotate faster than the particle will free-fall and the particle immediately loses contact with the rod.

2015 Paper 3 Q11
D: 1700.0 B: 1484.0

  1. A horizontal disc of radius \(r\) rotates about a vertical axis through its centre with angular speed \(\omega\). One end of a light rod is fixed by a smooth hinge to the edge of the disc so that it can rotate freely in a vertical plane through the centre of the disc. A particle \(P\) of mass \(m\) is attached to the rod at a distance \(d\) from the hinge. The rod makes a constant angle \(\alpha\) with the upward vertical, as shown in the diagram, and \(d\sin\alpha < r\).
    TikZ diagram
    By considering moments about the hinge for the (light) rod, show that the force exerted on the rod by \(P\) is parallel to the rod. Show also that \[ r\cot\alpha = a + d \cos\alpha \,, \] where \(a = \dfrac {g \;} {\omega^2}\,\). State clearly the direction of the force exerted by the hinge on the rod, and find an expression for its magnitude in terms of \(m\), \(g\) and \(\alpha\).
  2. The disc and rod rotate as in part (i), but two particles (instead of \(P\)) are attached to the rod. The masses of the particles are \(m_1\) and \(m_2\) and they are attached to the rod at distances \(d_1\) and \(d_2\) from the hinge, respectively. The rod makes a constant angle \(\beta\) with the upward vertical and \(d_1\sin\beta < d_2\sin\beta < r\). Show that \(\beta\) satisfies an equation of the form \[ r\cot\beta = a+ b \cos\beta \,, \] where \(b\) should be expressed in terms of \(d_1\), \(d_2\), \(m_1\) and \(m_2\).


Solution:

  1. Since the particle is not moving (relative to the hinge) there is no moment about the hinge and in particular the only forces must be directed towards the hinge, ie parallel to the rod.
    TikZ diagram
    \begin{align*} \text{N2}(\uparrow): && R \cos \alpha &= mg \\ \\ \text{N2}(\leftarrow, \text{radially}): && R \sin \alpha &= m (r-d\sin \alpha) \omega^2 \\ \Rightarrow && \cot \alpha &= \frac{g}{(r-d\sin \alpha) \omega^2} \\ \Rightarrow && r\cot \alpha-d \cos \alpha &= a \\ \Rightarrow && r \cot \alpha &= a + d \cos \alpha \end{align*} The force of the hinge is acting in the same direction and magnitude as the rod on the particle (the force \(R\) in the diagram). It has magnitude \(mg \sec \alpha\)
  2. \(\,\)
    TikZ diagram
    \begin{align*} \overset{\curvearrowleft}{\text{hinge}}: && gm_1d_1 \sin \beta+gm_2d_2 \sin \beta &= m_1 (r-d_1 \sin \beta) \omega^2 d_1 \cos \beta + m_2 (r-d_2 \sin \beta) \omega^2 d_2 \cos \beta \\ \Rightarrow && a(m_1d_1+m_2d_2) \tan \beta &= r(m_1d_1+m_2d_2) - (m_1d_1^2+m_2d_2^2) \sin \beta \\ \Rightarrow && r\cot \beta &= a + \frac{m_1d_1^2+m_2d_2^2}{m_1d_1+m_2d_2} \cos \beta \end{align*}

2000 Paper 3 Q10
D: 1700.0 B: 1500.0

A sphere of radius \(a\) and weight \(W\) rests on horizontal ground. A thin uniform beam of weight \(3\sqrt3\,W\) and length \(2a\) is freely hinged to the ground at \(X\), which is a distance \({\sqrt 3} \, a\) from the point of contact of the sphere with the ground. The beam rests on the sphere, lying in the same vertical plane as the centre of the sphere. The coefficients of friction between the beam and the sphere and between the sphere and the ground are \(\mu_1\) and \(\mu_2\) respectively. Given that the sphere is on the point of slipping at its contacts with both the ground and the beam, find the values of \(\mu_1\) and \(\mu_2\).


Solution:

TikZ diagram
The first important thing to observe is the angle at \(X\) is \(60^{\circ}\). Now we can start resolving: \begin{align*} \overset{\curvearrowleft}{X}: && 3\sqrt{3} W \cos 60^{\circ} a - R_1\sqrt{3}a &= 0 \tag{\(1\)}\\ \overset{\curvearrowleft}{O}: && \mu_2 R_2 a - \mu_1R_1a &= 0 \tag{\(2\)} \\ \text{N2}(\rightarrow): && \mu_2 R_2 + \mu_1R_1 \cos 60^{\circ} - R_1 \cos 30^{\circ} &= 0 \tag{\(3\)} \\ \text{N2}(\uparrow): && R_2 - W - \mu_1 R_1 \cos 30^{\circ} - R_1 \cos 60^{\circ} &= 0 \tag{\(4\)} \\ \Rightarrow && \frac{3}{2}W &= R_1 \tag{\((5)\) from \((1)\)} \\ && \mu_1 R_1 &= \mu_2 R_2 \tag{\(2\)}\\ && \mu_1 R_1 \l 1 + \frac{1}{2} \r - R_1 \frac{\sqrt{3}}2 &= 0 \tag{\((3)\) and \((2)\)} \\ && \mu_1 &= \frac{1}{\sqrt3} \\ \\ && R_2 - W - \frac{1}{\sqrt3} \frac{3}{2}W \frac{\sqrt3}{2} - \frac{3}2W \frac12 &= 0 \\ \Rightarrow && R_2 &= W \l 1 + \frac{3}{2}\r \tag{\(6\)} \\ \Rightarrow && \mu_2 &= \frac{\mu_1 R_1}{R_2} = \frac{1}{\sqrt{3}} \frac{3}{5} = \frac{\sqrt3}{5} \tag{\((5)\) and \((6)\)} \end{align*}

1992 Paper 1 Q12
D: 1484.0 B: 1471.5

The diagram shows a crude step-ladder constructed by smoothly hinging-together two light ladders \(AB\) and \(AC,\) each of length \(l,\) at \(A\). A uniform rod of wood, of mass \(m\), is pin-jointed to \(X\) on \(AB\) and to \(Y\) on \(AC\), where \(AX=\frac{3}{4}l=AY.\) The angle \(\angle XAY\) is \(2\theta.\) \noindent

\psset{xunit=1.0cm,yunit=1.0cm,algebraic=true,dimen=middle,dotstyle=o,dotsize=3pt 0,linewidth=0.5pt,arrowsize=3pt 2,arrowinset=0.25} \begin{pspicture*}(-4.3,-1.22)(4.6,6) \psline(-4,0)(4,0) \psline(-2,0)(0,5) \psline(0,5)(2,0) \psline(-1.21,1.97)(1.21,1.97) \parametricplot{-1.9513027039072617}{-1.190289949682532}{1.2*cos(t)+0|1.2*sin(t)+5} \rput[tl](-0.2,4.26){\(2\theta\)} \rput[tl](-0.1,5.5){\(A\)} \rput[tl](-1.8,2.1){\(X\)} \rput[tl](1.5,2.1){\(Y\)} \rput[tl](-2.36,-0.1){\(B\)} \rput[tl](2.02,-0.1){\(C\)} \end{pspicture*} \par
The rod \(XY\) will break if the tension in it exceeds \(T\). The step-ladder stands on rough horizontal ground (coefficient of friction \(\mu\)). Given that \(\tan\theta>\mu,\) find how large a mass \(M\) can safely be placed at \(A\) and show that if \[ \tan\theta>\frac{6T}{mg}+4\mu \] the step-ladder will fail under its own weight. {[}You may assume that friction is limiting at the moment of collapse.{]}