A small smooth ring \(R\) of mass \(m\) is free to slide on a fixed smooth
horizontal rail. A light inextensible string of length~\(L\) is
attached to one end,~\(O\), of the rail. The string passes through
the ring, and a particle~\(P\) of mass~\(km\) (where \(k>0\))
is attached to its other
end; this part of the string hangs at an acute
angle \(\alpha\) to the vertical and
it is given that \(\alpha\) is constant in the motion.
Let \(x\) be the distance between \(O\) and the ring. Taking the
\(y\)-axis to be vertically upwards, write down the Cartesian
coordinates of~\(P\) relative to~\(O\) in terms of \(x\), \(L\)
and~\(\alpha\).
- By considering the vertical component of the equation of motion of \(P\),
show that
\[
km\ddot x \cos\alpha = T \cos\alpha - kmg\,,
\]
where \(T\) is the tension in the string. Obtain two similar equations
relating to the horizontal components of the equations of motion of
\(P\) and \(R\).
- Show that
\(\dfrac {\sin\alpha}{(1-\sin\alpha)^2_{\vphantom|}} = k\), and
deduce, by means of a sketch or otherwise, that motion with \(\alpha\)
constant
is possible for all values of~\(k\).
- Show that \(\ddot x = -g\tan\alpha\,\).
A triangular wedge is fixed to a horizontal surface. The
base angles
of the wedge are \(\alpha\) and \(\frac\pi 2-\alpha\).
Two particles, of masses \(M\) and \(m\), lie on different faces of
the wedge, and are connected by a light inextensible string
which passes over a smooth pulley at the apex of the wedge, as
shown in the diagram.
The contacts between the particles and the wedge are smooth.
\psset{xunit=1.0cm,yunit=1.0cm,algebraic=true,dimen=middle,dotstyle=o,dotsize=3pt 0,linewidth=0.3pt,arrowsize=3pt 2,arrowinset=0.25}
\begin{pspicture*}(-0.12,-0.34)(8.27,3.81)
\pspolygon(5.74,3.35)(5.89,3.08)(6.15,3.24)(6,3.5)
\pscircle[linewidth=0.4pt,fillcolor=black,fillstyle=solid,opacity=0.4](5.99,3.5){0.23}
\psline(0,0)(6,3.5)
\psline(8,0)(6,3.5)
\psline(6.2,3.59)(7.03,2.13)
\psline(5.87,3.69)(1.99,1.44)
\psline(0,0)(8,0)
\rput[tl](0.91,0.44){\(\alpha\)}
\rput[tl](6.54,0.63){\(\frac{\pi}{2}-\alpha\)}
\rput[tl](1.38,1.99){\(M\)}
\rput[tl](7.31,2.6){\(m\)}
\begin{scriptsize}
\psdots[dotsize=12pt 0,dotstyle=*](7.03,2.13)
\psdots[dotsize=12pt 0,dotstyle=*](1.99,1.4)
\end{scriptsize}
\end{pspicture*}
- Show that if \(\tan \alpha> \dfrac m M \)
the particle of mass \(M\) will slide down the face of the wedge.
- Given that \(\tan \alpha = \dfrac{2m}M\), show that the magnitude of the
acceleration of the
particles is
\[
\frac{g\sin\alpha}{\tan\alpha +2}
\]
and that this is maximised at
\(4m^3=M^3\,\).
A block of mass \(4\,\)kg is at rest on a smooth, horizontal
table. A smooth pulley \(P\) is fixed to one edge
of the table and a smooth pulley \(Q\) is fixed to the opposite edge.
The two pulleys and the block lie in a straight line.
Two horizontal strings are attached to the block.
One string runs over pulley \(P\); a particle of mass \(x\,\)kg hangs at the end of this
string.
The other string runs over pulley \(Q\); a particle of mass \(y\,\)kg hangs
at the end of this string, where \(x > y\) and \(x + y = 6\,\).
The system is released from rest with the strings taut.
When the \(4\,\)kg block has moved a distance \(d\),
the string connecting it to the particle of mass \(x\,\)kg is cut.
Show that the time taken by the block from the
start of the motion until it first returns to rest
(assuming that it does not reach the edge of the table)
is \(\sqrt{d/(5g)\,} \,\f(y)\), where
\[
\f(y)= \frac{10}{ \sqrt{6-2y}}+ \left(1 + \frac{4}{ y} \right) \sqrt {6 -2y}.
\]
Calculate the value of \(y\) for which \(\f'(y)=0\).
A wedge of mass \(M\) rests on a smooth horizontal surface. The face of the
wedge is a smooth plane inclined at an angle \(\alpha\) to the horizontal.
A particle of mass \(m\) slides down the face of the wedge, starting from rest.
At a later time \(t\), the speed \(V\) of the wedge, the speed \(v\) of the particle
and the angle \(\beta\) of the velocity of the particle below the horizontal
are as shown in the diagram.
\psset{xunit=0.55cm,yunit=0.55cm,algebraic=true,dotstyle=o,dotsize=3pt 0,linewidth=0.5pt,arrowsize=3pt 2,arrowinset=0.25} \begin{pspicture*}(-3.96,-2.9)(9.6,6.78) \psline(0,0)(0,6) \psline(8,0)(0,6) \psline(8,0)(0,0) \psline{->}(1.13,2.31)(-1.98,2.31) \rput[tl](6.8,0.52){\(\alpha\)} \rput[tl](3.05,2.02){\(v\)} \psline(3.31,1.38)(4.47,-2.55) \rput[tl](4.08,-0.14){\(\beta\)} \rput[tl](-2.83,2.54){\(V\)} \psline{->}(2.41,4.53)(3.03,2.24) \begin{scriptsize} \psdots[dotsize=10pt 0,dotstyle=*](2.41,4.53) \end{scriptsize} \end{pspicture*}
\par
\noindent Let \(y\) be the vertical distance
descended by the particle. Derive the following results, stating in
(ii)
and
(iii) the mechanical principles you use:
- \(V\sin\alpha=v\sin(\beta-\alpha)\);
- \(\tan\beta=(1+m/M)\tan\alpha\);
- \(2gy=v^2(M+m\cos^2\beta)/M\).
Write down a differential equation for \(y\) and hence show that
$$y={gMt^2\sin^2\beta \over 2\,(M+m\cos^2\beta)}.$$
\(\,\)
\psset{xunit=1.0cm,yunit=1.0cm,algebraic=true,dotstyle=o,dotsize=3pt 0,linewidth=0.3pt,arrowsize=3pt 2,arrowinset=0.25}
\begin{pspicture*}(-2.2,-0.26)(7.1,4.4)
\pscircle[fillcolor=black,fillstyle=solid,opacity=0.4](5,4){0.19}
\psline(-2,0)(7,0)
\psline(0,0)(5,4)
\psline(5,4)(5,0)
\psline(-0.08,0.26)(4.88,4.15)
\rput[tl](-0.4,0.98){\(A\)}
\rput[tl](5.59,3){\(B\)}
\psline(5.18,4.02)(5.18,3)
\begin{scriptsize}
\psdots[dotsize=13pt 0,dotstyle=*](-0.08,0.23)
\psdots[dotsize=11pt 0,dotstyle=*](5.18,3)
\end{scriptsize}
\end{pspicture*}
\par
The diagram shows a small railway wagon \(A\) of mass \(m\) standing
at the bottom of a smooth railway track of length \(d\) inclined at
an angle \(\theta\) to the horizontal. A light inextensible string,
also of length \(d\), is connected to the wagon and passes over a light
frictionless pulley at the top of the incline. On the other end of
the string is a ball \(B\) of mass \(M\) which hangs freely. The system
is initially at rest and is then released.
- Find the condition which \(m,M\) and \(\theta\) must satisfy
to ensure that the ball will fall to the ground. Assuming that this
condition is satisfied, show that the velocity \(v\) of the ball when
it hits the ground satisfies
\[
v^{2}=\frac{2g(M-m\sin\theta)d\sin\theta}{M+m}.
\]
- Find the condition which \(m,M\) and \(\theta\) must satisfy
if the wagon is not to collide with the pulley at the top of the incline.