Edit Problem

Year

Paper

Question Number

Course

Section

Worksheet Citation (for copying)

Click the copy button or select the text to copy this citation for use in worksheets.

Problem Text

In this question, $n \geq 2$.
\begin{questionparts}
\item A solid, of uniform density, is formed by rotating through $360°$ about the $y$-axis the region bounded by the part of the curve $r^{n-1}y = r^n - x^n$ with $0 \leq x \leq r$, and the $x$- and $y$-axes.
Show that the $y$-coordinate of the centre of mass of this solid is $\frac{nr}{2(n+1)}$.
\item Show that the normal to the curve $r^{n-1}y = r^n - x^n$ at the point $(rp, r(1-p^n))$, where $0 < p < 1$, meets the $y$-axis at $(0, Y)$, where $Y = r\left(1 - p^n - \frac{1}{np^{n-2}}\right)$.
In the case $n = 4$, show that the greatest value of $Y$ is $\frac{1}{4}r$.
\item A solid is formed by rotating through $360°$ about the $y$-axis the region bounded by the curves $r^3y = r^4 - x^4$ and $ry = -(r^2 - x^2)$, both for $0 \leq x \leq r$.
$A$ and $B$ are the points $(0, -r)$ and $(0, r)$, respectively, on the surface of the solid.
Show that the solid can rest in equilibrium on a horizontal surface with the vector $\overrightarrow{AB}$ at three different, non-zero, angles to the upward vertical. You should not attempt to find these angles.
\end{questionparts}

Solution (Optional)

\begin{questionparts}
\item \begin{center}
    \begin{tikzpicture}[scale=2]
    \draw[->] (0, -0.5) -- (0, 1.5);
    \draw[->] (-2, 0) -- (2, 0);

\draw[domain = 0:1, variable = \x]  plot ({\x},{1-(\x)^3}); 
    \draw[domain = 0:1, variable = \x]  plot ({-\x},{1-(\x)^3});

% \draw (2, 0) -- (2, 4.2426);
    \draw[domain = 3.14:6.81, variable = \x]  plot ({(1-(0.6)^3)*cos(deg(\x))}, {0.5+sin(deg(\x))/10}); 
    \draw[domain = 0:6.81, variable = \x]  plot ({(1-(0.6)^3)*cos(deg(\x))}, {0.55+sin(deg(\x))/10}); 
    
    
    % \node at (2.05, 1.6) {\tiny $\delta x$};
    % \node at (2.5, 1.4) {\tiny $(x,y)$};
    
    \node[below] at (1, 0)  {\small $r$};
    \node[below] at (-1, 0)  {\small $-r$};
    \node[above left] at (0, 1)  {\small $r$};
    
\end{tikzpicture}
\end{center}

By symmetry, the centre of mass will lie on the $y$ axis.

Notice that a single slice (when revolved around the $y$-axis) has volume $y \cdot \pi \cdot ((x+ \delta x)^2 - x^2) = 2 \pi x y \delta x$, and COM at height $\frac12 y$ so we can conclude:

\[ \overline{y} \sum_{\delta x} 2 \pi x y \delta x = \sum_{\delta x} \pi xy^2  \delta x\]

\begin{align*}
&& \overline{y} \int_0^r 2xy  \d x &= \int_0^r  y^2 x \d x \\
\Rightarrow && \overline{y} 2\int_0^r \left (r - \frac{x^n}{r^{n-1}} \right)x \d x &= \int_0^r \left (r - \frac{x^n}{r^{n-1}} \right)^2 x \d x \\
\Rightarrow && \overline{y} \left [r \frac{x^2}{2} - \frac{1}{r^{n-1}} \frac{x^{n+2}}{n+2}  \right]_0^r &= \left [r^2 \frac{x^2}{2} - \frac{2}{r^{n-2}} \frac{x^{n+2}}{n+2} + \frac{1}{r^{2n-2}} \frac{x^{2n+2}}{2n+2} \right]_0^r \\
\Rightarrow && 2\overline{y} \left (\frac{r^3}{2} - \frac{r^3}{n+2} \right) &= \left (\frac12 r^4 - \frac{2}{n+2}r^4 + \frac{1}{2n+2}r^4 \right) \\
\Rightarrow && \overline{y}r^3 \frac{n}{(n+2)} &= r^4\frac{(n+1)(n+2)-2\cdot2\cdot(n+1)+(n+2)}{2(n+1)(n+2)} \\
\Rightarrow && \overline{y} \frac{n}{(n+2)} &= r \left ( \frac{n^2}{2(n+1)(n+2)} \right) \\
\Rightarrow && \overline{y} &= \frac{nr}{2(n+1)} \\
&&&= r \left (1 -p^n  \right)
\end{align*}

as required.

\item \begin{align*}
&& r^{n-1}y &= r^n - x^n \\
\frac{\d}{\d x}: && r^{n-1} \frac{\d y}{\d x} &= -n x^{n-1} \\
&& \frac{\d y}{\d x} &= -np^{n-1}
\end{align*}

Therefor the normal has the equation:

\begin{align*}
&& \frac{y-r(1-p^n)}{x-rp} &= \frac{1}{np^{n-1}} \\
\Rightarrow && Y &= \frac{-rp}{np^{n-1}} + r(1-p^n) \\
&&&= r \left (1 - p^n - \frac{1}{np^{n-2}} \right)
\end{align*}

If $n = 4$ then 
\begin{align*}
&& Y &= r\left (1 - p^4 - \frac{1}{4p^{2}} \right) \\
\Rightarrow && \frac{\d Y}{\d p} &= r \left (-4p^3 + \frac{1}{2p^3} \right)
\end{align*}

Therefore there is a stationary point if $p^6 = \frac18 \Rightarrow p =2^{-1/2}$. Clearly this will be a maximum (sketch or second derivative) therefore, $Y = r(1 - \frac14 - \frac{2}{4}) = \frac14 r$

\item The centre of mass of this shape can be found using this table:

\begin{array}{|c|c|c|} \hline
\text{} & \overline{y} & \text{mass} \\ \hline
r^3y = r^4 - x^4 & \frac{2r}{5} & \frac{4\pi r^3}{6} = \frac23 \pi r^3\\
ry = -(r^2 - x^2) & -\frac{r}{3}& \frac{2 \pi r^3}{4}=\frac12\pi r^3 \\ 
\text{combined} & \frac{(\frac25 \cdot \frac23-\frac13 \cdot \frac12)r^4}{\frac76 r^3} = \frac3{35}r & \frac76 \pi r^3\\
\hline 
\end{array}

Normals to the surface through points on the upper surface will meet the $y$-axis between $(-\infty, \frac14 r)$, and since $p = 0 \to -\infty$ and $p = 1 \to -\frac14 r$, so normals will pass through $(0, \frac3{35}r)$ from two different points.

Normals to the surface through points on the lower surface will go through $-r(1 - p^2 - \frac12) =- r(\frac12 -p^2)$ which ranges monotonically from $\frac12 r \to -\frac12 r$ so there will be one point where the normal goes through $\frac3{35}r$. Therefore there are three angles where the vector $\overrightarrow{AB}$ is not vertical but the normal to the surfaces runs through the centre of mass (ie the the solid can rest in equilibrium)

\end{questionparts}

Preview

Problem

Solution

Cancel

Current Ratings

Difficulty Rating: 1500.0

Difficulty Comparisons: 0

Banger Rating: 1500.0

Banger Comparisons: 0